Sephiroth Armor WIP [Part 2]

:ferris_wheel:

Another armor update today. As usual, shoutout to Van for being my tutor.

<References & Progress>

So this is where we left off, with the two pauldron pieces. As you can see there's some differences between the ref and final product. That means modifications need to be made. You'll be seeing this diagram I drew quite a bit in the future. **Note: I did heat seal & form my first two pieces before progressing to this step. More on that later.

<Modifications & Re-Patterning>

First we're going to mark with a Sharpie where the modifications need to go. Starting with dotted lines and getting a second opinion before finalizing anything can help a lot. I also recommend using multiple colors of Sharpie for making things a little neater.

Cut off the excess and SAVE THE PIECES. Be sure to cut between slabs of foam at a curve to make it look like a continuous line.

Trace the original paper pattern you made, and use the foam pieces you cut from your draft pauldrons to trace your modifications. Make adjustments as needed, cut the new pattern, and trace/cut the pieces from foam like in the first part.

That's all for today, since the next part is working on that other piece of the armor before finishing these guys up.

:tada: