EXO Christmas DIY ~ Task 13

Oh holy night~

EXO are brightly shining~

It is the night of our dear boys's countdown~

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

Hi aeris! Today I bring you a DIY for #Task13 of the Christmas Challenge!

My team is the #Seoulmates !

:fire: :sparkling_heart: :fire:

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: :sparkles: :sparkles: DIY :sparkles: :sparkles: :sparkles:

Today we are learning how to make an EXO Christmas ornament! :smile:

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: The materials :sparkles:

- an empty box of cereals

- 2 pieces of fabric (can be two different fabrics or the same)

- batting (optional)

- set square

- automatic pencil or pencil

- pen

- com

- scissors

- needle and thread

- pins

- a thread

- pillow filling or cotton

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: Making the mold :sparkles:

There are two ways to make the mold, you can print the EXO logo and cut it or you can draw it on the cereal box like I did.

Begin by drawing an hexagon with the help of the com, and then use the set square to make a 1cm border around the main lines.

Use the com to make circles on the edges of the hexagon using 1cm too. After define the EXO logo using a pen and cut it.

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: Cuting the fabric :sparkles:

all the fabrics with a pin and use the mold to draw the logo on the fabric. When you are done drawing cut the logo leaving a 5mm border.

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: Organizing the fabrics :sparkles:

If you are only using two fabrics, them with the part you want to be seen later facing the inside. If you are using the batting, them like it was said before but leave the batting on the outside:

batting - fabric 1 - fabric 2

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: Sewing :sparkles:

Sew following the line you drow before but don't sew the inside part! Don't forget to leave a bit unsewed so you can turn the fabric inside out.

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: Detail :sparkles:

Use the mold to make a small mold of the inside part and pin it to the fabric so you can sew around it. Before you begin to sew fill the 3 legs of the logo.

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

:sparkles: Finishing touches :sparkles:

Once you are done sewing fill the logo and stitch the opening.

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

And that's it!

｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ✧ ｡･:*:･ﾟ

I hope you liked the EXO Christmas ornament!

If you make one please share with me I would love to see it! :smile:

#EAElyxmas

#featurethis